|
CM 100
Dimensions: 20" x 24" x 40", Weight:
66 lbs.
DESCRIPTION: Manual control applicable to the hydraulic
versions CR130H - CR140H - CR160H.
The machine works in manual controlled by the operator,
who has to manage completely the geometry of the bend
and the advancement of the roller, the positioning of
which is visualized on the two displays.
CN 111
Dimensions: 20" x 24" x 40", Weight:
66 lbs.
DESCRIPTION: Electronic control applicable to hydraulic
versions CR131H - CR141H - CR161H.
The machine works in multi-run electronically controlled
by a micro-processor which can be operated manually,
in semi-automatic mode and automatic mode with the option
to interrupt the work cycle to carry out checks. The
software installed performs single radius bends or bends
with three radii assuring correct repetition of the
performance and the option to store in the memory up
to 199 different single radius programs and 19 multi-radius
programs.
CR126HA
Dimensions: 20" x 24" x 40", Weight:
66 lbs.
DESCRIPTION: Electronic control applicable to versions
CR126HA
The machine works in multi-run electronically controlled
by a micro-processor which can be operated manually,
in semi-automatic mode and automatic mode with the option
to interrupt the work cycle to carry out checks. The
software installed performs single radius bends or bends
with multiple radii up to 50 assuring repetition of
the performance and the option to store in the memory
up to 99 different programs.
 CN
112 - HA / HAIM
Dimensions: 20" x 24" x 40", Weight:
70 lbs
DESCRIPTION: Electronic control applicable to versions
CR130HAIM - CR140HAIM - CR160HAIM.
CN112 Numerical Control operated by a 32-bit processor,
equipped with 4x20 LtCD and 32-button panel, which allows
the performance of single-radius and multi-radii bends.
It performs processing in single run with 50 programmes
steps and 500 movement speeds of the lower rollers.
The programming takes place by positioning of the bending
roller, storing in the memory and subsequent automatic
suggestions for different radii. In the HAIM version
the roller rotation speed is variable, which allows
the performance of very small bending radii and speeds
up processing in the event of large radii. It also performs
processing in multi-run on a single radius. For repetitive
processing, we apply an automatic bar reader encoder
and a photocell for start of cycle. Prepared with a
RS232 serial connection for communication of data between
PC and machine.
CNC 123
Dimensions: 48" x 24" x 40", Weight:
230 lbs.
DESCRIPTION: Numerical control available with the hydraulic
versions CR138CNCHEF - CR148CNCHEF. Maintaining the
characteristics of the CNC series, the program is able
to manage a photocell which controls the exact position
of the bar, starting up the bending cycle and/or the
action of the bar reading automatic encoder at the start
and end of the bending cycle. The control consist of
an industrial computer, 14" color monitor, and
industrial keyboard. The multilingual software features
an icon shape based programming system accepting radius,
diameter, arch length, and angle information. Automatic
springback capabilities, preloaded default formulas,
and self-checking program allows for fast accurate programming
of shapes with up to 12 radii stored on the hard drive
for easy recall in single or multi-pass.
 CNC
233
Dimensions: 48" x 24" x 40", Weight:
230 lbs.
DESCRIPTION: Numerical control available with the hydraulic
versions CR138IM - CR148IM.
It performs bending in single run with the possibility
to program bends with 36 different radii on the same
bar and controls over 500 positioning speeds of the
bending roller. In addition to all the functions of
the CNC 123 version controls, it is capable of controlling
and managing the servo roller rotation speed automatically,
allowing the performance of very small bending radii
and speeding up processing in the event of larger radii.
|
 |
