CR 168 CNC HEF


Features:

· The CR 168 CNC HEF is an open-end roll bending machine with three drive rolls. The two outside rolls are hydraulically positioned to achieve the required radius.

· Roll position held in position by check valve hydraulic system.

· An electronic material detection photo-eye is standard and can be used to determine the starting point of the program. A pneumatic encoder positioning system is utilized to allow for easy loading and unloading of the material. Programmed movements of both rolls positions also assist in the loading and unloading process to increase production.

· The operator enters the required radius and degree of bend for each individual bend and straight section of the part or by entering chord height and length or by automatic program development using the outside dimensions of the parts for several common shapes.

· Side guide rolls are mounted outside the bending rolls and manually adjustable for controlling the pitch of a coil or for correcting a natural
twist in the bent part. Optional automatic programmable pitch control.

· The model CR 168 CNC HEF operates in a horizontal bending position bending plane.

TECHNICAL DATA
Shaft Diameters…………………………………………….…………….Center 95mm. Outside 86mm
Roller Diameter…………………………………………….………….315 mm / 12.4 in.
Shaft Rotation Speed……………………………………………………………3/6 rpm
Motor Power…………………………...…………………………….………9HP / 12HP
Machine Weight……………………………………….…………………….….7040 lbs.
Machine Dimensions - L x W x H…………….………………………….116"x68"x52"Console Dimensions………………………………………………………..48"x24"x40"Console Weight………………………………………………………..…………235 lbs.

Note: Technical data and descriptions are for information only and they can change without notice.

Suitable Applications: Multiple Radius, Elliptical, Lowered Arch bends in large steel material, H & I Beams and extrusions.